Tools And Instruments; Test Propeller; Measuring Instruments - TOHATSU MD 70-90C2 Service Manual

3. Tools and Instruments

1) Test Propeller

P/N. 3T1-64111-0
Outer diameter : 278mm
With : 25mm
Model
TLDI75C2
TLDI90C2

2) Measuring Instruments

For the following measuring instruments, use commercially available ones.
Circuit tester
Vernier calipers
Micrometer
Cylinder gauge
Ring gauge
Dial gauge
Thickness gauge
V block
Surface plate
Dial gauge magnet base or dial gauge stand
TLDI 75/90C2 2010
Rotational speed at WOT
(Wide Open Throttle) (r/min)
approximately 5,000 - 5,100
approximately 5,500 - 5,600
( Resistance : 1Ω, 10Ω, 10 kΩ, AC voltage : 30 to 300V, DC voltage : 30V, Internal voltage 3V or less )
( M1 type, 300 mm )
( minimum graduation of 0.01, outer, 0 to 25 mm, 25 to 50 mm, 50 to 75 mm )
( 4 to 6 mm, 10 to 25 mm, 25 to 30 mm, 50 to 75 mm )
( ø5.5, ø16, ø25, ø30, ø61)
( minimum graduation of 0.01 )
( 0.03 to 0.3 mm )
( 500 mm x 500 mm )
1
1-5