SELVA MARINE Pike 9,9 Service Manual page 194

BRKT
3. Install the friction plate assembly onto the
swivel bracket and tighten the friction
plate bolts 3 and 4 temporarily.
4
NOTE:
Before installing the friction plate bolts 4,
turn the outboard motor all the way to port or
starboard.
4. Tighten the friction plate bolts 3 and 4
to the specified torques.
Friction plate bolt (M8) 3:
18 N·m (1.8 kgf·m, 13.3 ft·lb)
Friction plate bolt (M5) 4:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
5. Move the steering lock lever 5 to posi-
tion d, and then tighten the self-locking
nut 6 to the specified torque.
7-13
Bracket unit
4
3
S6AU7013
5
d
6
S6AG7B20
NOTE:
To check and adjust the friction plate, see
"Checking the steering operation (H model)"
(3-12).
Friction self-locking nut 6:
6 N·m (0.6 kgf·m, 4.4 ft·lb)
6AU3K11