Removing The Cylinder Head; Disassembling The Cylinder Head - SELVA MARINE Pike 9,9 Service Manual

Removing the cylinder head

1. Remove the cylinder head cover.
2. Remove the cylinder head bolts in the
sequence shown.
5
9
6
CAUTION:
Do not scratch or damage the mating sur-
faces of the cylinder head and cylinder
block.

Disassembling the cylinder head

1. Remove the oil pump assembly 1.
1
NOTE:
To disassemble, check, and assemble the oil
pump, see "Checking the oil pump" (5-37).
2. Pull out the rocker arm shaft 2, and then
remove the springs 3, collars 4 and 5,
and rocker arms 6.
6AU3K11
5
4
1
8
3
7
2
S6AU5073
5
S6AU5074
4 3 4 3 5
6 6
NOTE:
• Loosen the locknuts and adjusting screws
to ease the tension on the rocker arm shaft
before pulling it out.
• Be sure to keep the parts in the order as
they were removed.
3. Remove the camshaft 7 and oil seal 8.
7
Cylinder head
2
1
2
S6AU5075
3
4
8
5
6
S6AU5076
7
8
9
5-28