Checking The Engine Shut-Off Switch (H Model); Checking The Engine Shut-Off Switch (R Model) - SELVA MARINE Pike 9,9 Service Manual

– +
ELEC
Checking the engine shut-off switch
(H model)
1. Disconnect the engine shut-off switch 1
connector and terminal.
W
2. Check the engine shut-off switch 1 for
continuity between the engine shut-off
switch connector and terminal (engine
shut-off switch end). Replace if out of
specification.
a
c
8-33
Electrical system
1
W
B
S6AU8040
b
B
W
S6AG8150
Engine shut-off switch continuity:
8
White (W) – Black (B)
Switch position
Clip installed a
Engine stop button
pushed b
Clip removed c
3. Connect the engine shut-off switch con-
nector and terminal.
Checking the engine shut-off switch
(R model)
1. Disconnect the 10-pin main harness cou-
pler.
2. Turn the engine start switch to "ON," and
then check the engine shut-off switch for
continuity at the 10-pin main harness
coupler (remote control box end). Check
the wiring harness or replace the engine
shut-off switch if out of specification.
1
Engine shut-off switch continuity:
White (W) 1 – Black (B) 2
Switch position
Clip installed
Clip removed
3. Turn the engine start switch to "OFF."
4. Connect the 10-pin main harness cou-
pler.
Continuity
No
Yes
Yes
ON
OFF START
2
Continuity
No
Yes
8
S6AU8042
6AU3K11