Removing The Carburetor; Disassembling The Carburetor; Checking The Carburetor - SELVA MARINE Pike 9,9 Service Manual

FUEL

Removing the carburetor

1. Disconnect the fuel hose 1 and blowby
hose 2.
2
1
2. Disconnect the throttle link rod 3 and
choke rod 4.
3. Disconnect the choke solenoid coupler
5. (R model)
NOTE:
The choke solenoid coupler 5 is located
under the junction box 6.
4. Remove the bolts 7, and then remove
the intake silencer 8 and carburetor
assembly 9.
9

Disassembling the carburetor

NOTE:
See the exploded diagram for disassembly
(4-9).
1. Remove the float pin 1, float 2, and
needle valve.
4-11
Fuel system
S6AU4020
7
8
7
4
3
S6AU4021
4
1
2
NOTE:
Remove the float pin 1 in the direction of the
arrow shown, which is opposite to the arrow
mark a on the carburetor body 3.

Checking the carburetor

1. Check the air and fuel passages and jets.
Clean the carburetor body if there is dirt
or foreign material.
2. Blow compressed air into all passages
and jets.
6
5
WARNING
Wear appropriate protective eye gear dur-
ing the cleaning process to prevent any
eye injury by the blown-off debris or liq-
uid.
3. Check the main jet, pilot jet, and main
nozzle. Clean if there is dirt or residue.
4
CAUTION:
Do not use steel wire clean the jets, other-
wise the jet diameters may be enlarged,
which may seriously affect performance.
a
3
S6AU4035
4
S6AU4022
6AU3K11