Disassembling The Manual Starter; Checking The Manual Starter - SELVA MARINE Pike 9,9 Service Manual

Disassembling the manual starter

1. While holding the starter rope 1, turn the
sheave drum 2 in the direction of the
arrow shown until there is no tension in
the spiral spring.
2
2. Remove the drive plate 3 and drive pawl
spring 1 4.
3
4
3. Remove the sheave drum 2.
5
4. Remove the spiral spring 5 from the
manual starter cover.
WARNING
The spiral spring can pop out. Cover the
spiral spring with rags when removing it.
6AU3K11
5
1
S6AU5175
S6AU5025
2
S6AU5026
Manual starter (M model)
5. Remove the starter rope 1 and E-clip 6,
and then remove the drive pawl 7, drive
pawl spring 2 8, and spring 9 from the
sheave drum 2.
7
6
7
8
9
2

Checking the manual starter

1. Check the drive pawl, E-clip, starter
plunger, and drive plate. Replace if
cracked or damaged.
2. Check the springs. Replace if bent,
cracked, or damaged.
1
2
3
1
S6AU5027
4
5
5
6
7
S6AG5550
8
9
5-8