Checking The Pinion And Forward Gear; Checking The Bearing; Checking The Drive Shaft; Checking The Shift Rod - SELVA MARINE Pike 9,9 Service Manual

4
CAUTION:
Do not reuse the bushing, always replace
it with a new one.
Driver rod L3 3: 90890-06652
Bushing attachment 4:
90890-06650
Checking the pinion and forward
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the forward gear.
Replace the pinion or forward gear if
cracked or worn.

Checking the bearing

1. Check the bearings. Replace if pitted or if
there is rumbling.

Checking the drive shaft

1. Check the drive shaft. Replace if bent or
worn.
2. Measure the drive shaft runout. Replace
if above specification.
Drive shaft runout limit:
1.0 mm (0.0394 in)
6AU3K11
3
4
S6AU6158
6
6
6
S6AU6037
Drive shaft and lower case

Checking the shift rod

1. Check the shift rod. Replace if bent or
worn.

Checking the lower case

1. Check the skeg, torpedo, and anti-cavita-
tion plate. Replace the lower case if
cracked or damaged.

Assembling the lower case

1. Install the original forward gear shim(s)
1 and a new ball bearing 2.
4
1 2
NOTE:
Install the ball bearing with the manufacture
identification mark facing toward the forward
gear.
Driver rod LL 3: 90890-06605
Ball bearing attachment 4:
90890-06634
6
1
6
2
6
3
3
1 2 4
G
S6AU6039
5
6
7
8
9
6-12