Checking The Engine Start Switch (R Model); Checking The Neutral Switch (H Model With Electric Starter) - SELVA MARINE Pike 9,9 Service Manual

– +
ELEC
3. Check the engine start button 1 for con-
tinuity between the engine start button
connectors (engine start button end).
Replace if out of specification.
1
b
a
Engine start button continuity:
Red (R) – Brown (Br)
Button position
Free a
Pushed b
4. Connect the connectors of the engine
start button 1.
Checking the engine start switch (R
model)
1. Disconnect the 10-pin main harness cou-
pler.
2. Measure the input voltage between the
10-pin main harness coupler (outboard
motor end) and the ground. Check the
fuse and wiring harness if below specifi-
cation.
R
8-27
Electrical system
Br
R
S6AG8180
Continuity
No
Yes
S6AU8027
Engine start switch input voltage
(reference data):
Red (R) – Ground
12 V (battery voltage)
3. Set the remote control lever to the N
position.
4. Check the engine start switch for continu-
ity at the 10-pin main harness coupler
(remote control box end). Check the wir-
ing harness and neutral switch, or
replace the engine start switch if out of
specification.
8
White
Switch
(W)
1
position
OFF
ON
ON
(PUSH)
START
START
(PUSH)
5. Connect the 10-pin main harness cou-
pler.
Checking the neutral switch (H
model with electric starter)
1. Disconnect the neutral switch 1 connec-
tors.
ON (PUSH)
OFF START (PUSH)
3
4
1
6
5
2
Lead color
Black Red Yellow Brown
(B) (R) (Y) (Br)
2 3 4 5
S6AU8028
Blue
(L)
6
8
6AU3K11