General
Checking the anode
1. Check the anodes. Clean the anodes if
there are scales, grease, or oil.
È
É
Ê
È PT model
É Except for high thrust model
Ê For high thrust model
6AU3K11
3
CAUTION:
3
Do not oil, grease, or paint the anodes,
otherwise they will be ineffective.
NOTE:
• Replace the anodes if excessively eroded.
In addition, check the ground lead.
• If it is necessary to disassemble the out-
board motor to check an anode, refer to the
applicable disassembly procedure in this
manual.
S6AU3048
Checking the battery
1. Check the battery electrolyte level. If the
level is at or below the minimum level
mark a, add distilled water until the level
is between the maximum and minimum
level marks.
S6AG3280
2. Check the specific gravity of the electro-
lyte. Fully charge the battery if below
S6AU3050
specification.
S6AU3052
Lower unit / General
3
S69J3620
3-16
1
2
3
4
5
6
7
8
9