Checking The Gear Shift And Throttle Operation - SELVA MARINE Pike 9,9 Service Manual

GEN
INFO
2. Turn the throttle cam 1 counterclock-
wise until the fully closed stopper a on
the cam contacts the fully closed stopper
b on the throttle cable bracket 2 and
hold it in that position. Connect the throt-
tle cable 3 to the throttle cam, and then
install the clip 4.
1
4
3
NOTE:
Pull the throttle cable 3 toward the engine to
remove any free play in the cable before con-
necting the throttle cable joint.
3. Check that the shift lever 5 is in the N
position as shown. Connect the shift
cable 6 to the shift lever, and then install
the clip 7.
N
R
F
1-15
General information
2
1
b
a
2
S6AU1020
5
7
6
S6AU1021
c
S6AU1022
WARNING
The shift/throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
c.
Checking the gear shift and throttle
operation
1. Check that the throttle operates smoothly
when the throttle grip is turned from the
fully closed position to the fully open
position a. (H model)
Check that the throttle operates smoothly
when the remote control lever is shifted
from the F position or R position to the
fully open position a. (R model)
2. Check that the gear shift operates
smoothly when the shift lever or remote
control lever is shifted from the N position
to the F position or R position.
È
N
R
F
É
R
1
S6AU1044
N
F
a
1
S6AU1023
6AU3K11
1
a