SELVA MARINE Pike 9,9 Service Manual page 247

È Pass the PT motor leads (Sb, Lg) and PT relay leads (Sb, Lg) through the caps, and then connect the
leads to the terminals and cover the connections with the caps. Be sure to pass leads of the same color
through the caps and connect them to the same terminal. (PT model)
É Fasten the PT relay leads (Sb, Lg, R) (PT model), PT motor lead (PT model), and wiring harness
connector (R) to the bracket with a plastic tie.
Ê Install the terminals of the negative battery cable and PT relay lead (R) (PT model) using the bolt as
shown.
6AU3K11
Electrical component and wiring harness routing
1
2
3
4
5
6
7
8
9
8-10