SELVA MARINE Pike 9,9 Service Manual page 253

È Route the engine shut-off switch lead under the throttle cables.
É Route the engine shut-off switch lead as shown, making sure that the lead does not contact the throttle
shaft.
Ê Fasten the engine start button lead at the white tape with a plastic tie. Install the plastic tie as shown. (E
model)
Ë Align the blue tape on the engine start button lead with the grommet in the bottom cowling. Position the
slack in the engine start button lead toward the tiller handle. (E model)
6AU3K11
Electrical component and wiring harness routing
1
2
3
4
5
6
7
8
9
8-16