Disassembling The Friction Plate; Assembling The Friction Plate - SELVA MARINE Pike 9,9 Service Manual

Disassembling the friction plate

1. Remove the friction plate bolts 1 and 2,
and then remove the friction plate
assembly from the swivel bracket.
1
2
NOTE:
Before removing the friction plate bolts 1,
turn the outboard motor all the way to port or
starboard.
2. Disassemble the friction plate assembly.
NOTE:
See the exploded diagram for disassembly
(7-11).

Assembling the friction plate

1. Turn the steering lock shaft 1 until it is
flush with the end a of the nut 2 on the
bracket.
1
a
2
6AU3K11
7
1
S6AG7A90
7
1 2
a
S6AG7B00
Friction plate (H model)
b
NOTE:
If the steering lock shaft is not aligned with
position b, turn it less than 90° c until it is
aligned.
2. Assemble the friction plate assembly.
NOTE:
• See the exploded diagram for assembly (7-
11).
• Face the "TOP" mark on the steering lock
lever up.
• Be sure to install the collars in the correct
positions; the collar lengths are different.
c
S6AG7B01
7-12
1
2
3
4
5
6
7
8
9