Replacing The Timing Belt - SELVA MARINE Pike 9,9 Service Manual

POWR

Replacing the timing belt

CAUTION:
Do not turn the flywheel magnet counter-
clockwise, otherwise the water pump
impeller may be damaged.
NOTE:
To remove and install the timing belt, drive
sprocket, and driven sprocket, see "Remov-
ing the timing belt and sprocket" (5-21) and
"Installing the sprocket and timing belt" (5-
22).
1. Disconnect the spark plug caps and
remove the spark plugs.
2. Disconnect the cooling water hose 1
from the thermostat cover.
3. Remove the flywheel magnet nut.
WARNING
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
5-3
Power unit
1
S6AU5008
S6AG5G30
5
NOTE:
Use a 22 mm socket to loosen the flywheel
magnet nut.
Flywheel holder: 90890-06522
4. Remove the flywheel magnet and Woo-
druff key.
CAUTION:
To prevent damage to the engine or tools,
screw in the puller set bolts evenly and
completely so that the flywheel puller is
parallel to the flywheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521
5. Remove the charge coil 2.
6AU3K11