Checking The Neutral Switch (R Model) - SELVA MARINE Pike 9,9 Service Manual

2. Push the engine start button 2, and then
measure the input voltage between the
neutral switch connector (engine start
button end) and the ground. Check the
engine start button and wiring harness if
below specification.
2
R
Br
Br
Br
1
Neutral switch input voltage
(reference data):
Brown (Br) – Ground
12 V (battery voltage)
3. Check the neutral switch 1 for continuity
between the neutral switch connectors
(neutral switch end). Replace if out of
specification.
1
a
b
6AU3K11
Br
B
S6AU8029
Br
Br
S6AG8220
Neutral switch continuity:
Brown (Br) – Brown (Br)
Switch position
Pushed a (N
position)
Free b (F position or
R position)
4. Connect the connectors of the neutral
switch 1.
Checking the neutral switch (R
model)
NOTE:
Be sure to check the engine start switch for
continuity before checking the neutral switch.
1. Set the remote control lever to the N
position.
2. Turn the engine start switch to "START,"
and then check the neutral switch for
continuity at the 10-pin main harness
coupler (remote control box end).
Starting system
1
Continuity
Yes
No
2
3
8
4
5
6
7
8
9
8-28