SELVA MARINE Pike 9,9 Service Manual page 86

POWR
9. Turn the drive sprocket clockwise 2
turns, and then check that the parts are
aligned at the areas f and g as shown.
g
10. Install the charge coil 2 and tighten the
charge coil bolts 5 to the specified
torque.
11. Install the Woodruff key 6, and then
install the flywheel magnet 7.
m
n
n
E
k 7
NOTE:
• Be sure to remove any grease from the
tapered portion h of the crankshaft and the
inner surface k of the flywheel magnet.
• Apply engine oil to the threads m of the fly-
wheel magnet nut 8 and upper and lower
surfaces n of the washer before installa-
tion.
12. Tighten the flywheel magnet nut 8 to the
specified torque.
5-5
Power unit
f
S6AU5020
8
5
LT
6
271
2
S6AU5021
WARNING
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
Flywheel holder: 90890-06522
Charge coil bolt 5:
7
Flywheel magnet nut 8:
13. Install all parts removed during disas-
sembly.
h
12 N·m (1.2 kgf·m, 8.9 ft·lb)
98 N·m (9.8 kgf·m, 72.3 ft·lb)
S6AG5G40
6AU3K11