Removing The Drive Shaft, Drive Shaft Housing, And Shift Rod; Disassembling The Drive Shaft Housing; Disassembling The Lower Case - SELVA MARINE Pike 9,9 Service Manual

LOWR
Removing the drive shaft, drive shaft
housing, and shift rod
1. Remove the E-clip 1, pinion 2, and
thrust washer 3.
2. Remove the drive shaft, drive shaft hous-
ing assembly 4, gasket 5, and shift rod
6.
6
4
5
3. Remove the drive shaft sleeve.
4. Pull out the forward gear.
Disassembling the drive shaft
housing
1. Remove the oil seals and bushing.
6-11
Lower unit
3
2
1
S6AU6028
S6AU6029
6
2
Driver rod L3 1: 90890-06652
Bushing attachment 2:
90890-06650

Disassembling the lower case

1. Remove the ball bearing and forward
gear shim(s).
CAUTION:
Do not reuse the bearing, always replace
6
it with a new one.
Stopper guide plate 1: 90890-06501
Bearing puller assembly 2:
90890-06535
2. Remove the bushing from the lower
case.
1
2
1
2
S6AU6031
6
S6AU6035
6AU3K11