Checking The Pinion And Forward Gear; Checking The Bearing; Checking The Drive Shaft; Checking The Shift Rod - SELVA MARINE Pike 9,9 Service Manual

LOWR
2. Remove the needle bearing from the
lower case.
4
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Driver rod L3 3: 90890-06652
Needle bearing attachment 4:
90890-06617
Checking the pinion and forward
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the forward gear.
Replace the pinion or forward gear if
cracked or worn.

Checking the bearing

1. Check the bearings. Replace if pitted or if
there is rumbling.

Checking the drive shaft

1. Check the drive shaft. Replace if bent or
worn.
2. Measure the drive shaft runout. Replace
if above specification.
6-33
Lower unit
3
4
S6AU6114
S6AU6115
Drive shaft runout limit:
0.5 mm (0.0197 in)

Checking the shift rod

1. Check the shift rod. Replace if bent or
worn.

Checking the lower case

1. Check the skeg, torpedo, and anti-cavita-
tion plate. Replace the lower case if
cracked or damaged.

Assembling the lower case

1. Install a new taper roller bearing outer
race 1.
3
6
1
Driver rod LL 2: 90890-06605
Bearing outer race attachment 3:
90890-06625
6
2. Install a new needle bearing into the
lower case to the specified depth a.
6
5
4
2
1
5
b
a
6
G
6
6
6
G
S6AU6117
4
c
6
S6AU6119
6AU3K11