Removing The Lower Unit - SELVA MARINE Pike 9,9 Service Manual

Removing the lower unit

1. Drain the gear oil.
2. Set the gear shift to the N position, place
a block of wood between the anti-cavita-
tion plate and propeller to keep the pro-
peller from turning, and then remove the
propeller nut and propeller.
WARNING
• Do not hold the propeller with your
hands when loosening or tightening it.
• Be sure to disconnect the battery cables
from the battery and remove the clip
from the engine shut-off switch. (E
model)
3. Loosen the locknut 1 while holding the
adjusting nut 2, and then turn the adjust-
ing nut to disconnect the shift rod 3.
NOTE:
Set the gear shift to the R position before dis-
connecting the shift rod.
6AU3K11
4. Remove the locknut 1.
6
2
1
3
NOTE:
Be sure to remove the locknut from the shift
rod before removing the lower unit.
S6AU6003
5. Remove the lower unit by removing the
lower case mounting bolts 4.
6. Remove the anode 5 and cooling water
inlet covers 6.
S6AU6004
6
Lower unit
S6AU6005
4
6
S6AU6006
1
2
3
4
5
6
4
5
7
8
9
6-4