Checking The Ignition Timing; Bracket Unit; Checking The Steering Operation (H Model) - SELVA MARINE Pike 9,9 Service Manual

Digital tachometer: 90890-06760
Engine idle speed: 1,050 ± 50 r/min
3. Turn the throttle stop screw 2 in direc-
tion a or b until the specified engine
idle speed is obtained.
2
b a
NOTE:
• To increase the engine idle speed, turn the
throttle stop screw 2 in direction a.
• To decrease the engine idle speed, turn the
throttle stop screw 2 in direction b.
4. After adjusting the engine idle speed, rev
the engine a few times and let it idle to
check the stability of the engine.

Checking the ignition timing

1. Start the engine and warm it up.
2. Attach the special service tool to spark
plug wire #1 1.
Timing light: 90890-03141
6AU3K11
3. Check that the pointer a is aligned with
the "5" mark on the flywheel magnet as
shown.

Bracket unit

Checking the steering operation (H
model)
S6AU3036
NOTE:
Lubricate the swivel bracket before checking
the steering operation.
1. Move the steering lock lever 1 to posi-
tion a and check that the steering is
locked.
Move the steering lock lever 1 to posi-
tion b and check that the steering oper-
ates smoothly.
3
1
S6AU3037
Control system / Bracket unit
5 T
a
Ignition timing at 1,050 r/min:
BTDC 5 ± 3°
b
a
1
2
S6AU3038
3
3
4
3
5
6
7
1
8
S6AU3039
9
3-12