Acura 2002 RSX Service Manual page 998

19. With a sponge, apply a light coat of body primer to
t h e o r i g i n a l a d h e s i v e r e m a i n i n g a r o u n d t h e r e a r
window opening flange. Let the body primer dry for
at least 10 minutes:
. Do not apply glass primer to the body, and be
careful not to mix up the glass and body primer
sponges.
. Never touch the primed surlaces with you hands.
,ti;'il I Apply bodv primel hore.
16 mm
10.63 in.)
15.5 mm
(0.61 in.l
20 mm
(0.79 in.l
1 6 m m
10.63 in.l
Before filling a cartridge, cut a
"V" in the end of lhe
nozzle (A) as shown.
13 mm (0.51 in.)
20.
8 mm (0.31 in.)
20-31
21. Pack adhesive into the cartridge without air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead oJ adhesive (A)
around the edge of the rear window (B) as shown'
With the printed dots (C) on the rear window as a
guide, apply the adhesive to both side portions of
the rear window.
Apply the adhesive within 30 minutes after
applying the glass primer. Make a slightly thicker
bead at each corner.
1 3 m m
(0.51 in.l
2 m m
{0.08 in.) -,A
i\-
s;;
(0.31 in.)
"",0"
fl
a l
^ ' (
.t-B
(cont'd)