Acura 2002 RSX Service Manual page 1411

)
15. Turn the ignition switch OFF Disconnect the
battery negative cable, and wait for 3 minutes.
16. Disconnectthe driver's airbag connector (A), front
passenger's airbag connector (B), and driver's seat
belt tensioner connector (C).
)
J
17. Disconnect SRS unit connector C (18P) from the
SRS unit.
Disconnect the special tool (2 Q ) from the
dashboard wire harness 4P connector.
Reconnect the battery negative cable.
Turn the ignition switch ON (ll).
Check for voltage between the No 9terminal of
SRS unit connector C (18P) and body ground, and
between the No. 18 terminal and body ground.
There should be 0.5 V or less.
'19.
20.
2 1 .
SRS UNIT CONNECTOR C {18P)
ls the voltage as specified?
YES- Faulty SRS unit; replace the sRS unit (see
page 23-138).1
NO Shon to power in the dashboard wire
harness; replace the dashboard wire harness l
23-65