Acura 2002 RSX Service Manual page 995

Hide thumbs Also See for 2002 RSX:

Table of Contents

Rear Window Replacement (cont'd)

1'1. Glue the upper fasteners (A) and lower fasteners

(B) with adhesive tape (3M 5312; or eguiralent).

Glue the spacer (C) with adhesive tape (NITTO

501M, or equivalent) to the inside face of the rear

window (D) as shown. lf necessary, apply primer

(3M N-200, or equivalent) to the areas where the

window antenna terminal base (E) will be glued,

then glue the base on with adhesive tape (3M 4211.

or eouivalent):

. Be sure the fasteners and spacer (and window

antenna terminal base) Iine up with the

alignment marks (F).

. Be careful notto touch the rearwindowwhere

a d h e s i v e w i l l b e a p p l i e d .

: Appty plrmlr' hete.

12. Apply primer (3M C-100. or equivatent)to the

inside face around the entire molding (A), and

apply the double-faced adhesive tape (B) 13M 4216.

or equivalent). Do not peel off the adhesive backinq.

Chapters

Table of Contents