Acura 2002 RSX Service Manual page 1479

!
Side Airbag:
6. Disconnect the side airbag 2P connector (A) from
the floor wire harness.
Seat beh tensioner:
7. Disconnect the seat belt tensioner 2P connector (A)
from floor wire harness.Pull the seat belt out all the
wav and cut it.
Seat belt buckle tensioner:
8. Disconnectthe seal belt buckle tensioner
connector (A) from floor wire harness.
4 P
23-133
9. Cut off each connector, striD the ends of the wires.
and connect the deployment tool alligator clips {A)
to the wires. Place the deployment tool at least 30
feet (10 meters) away from the vehicle.
NOTE: The drlver's airbag and the front passenger's
airbag each have four wires, two yellow and two
red. Twist each pair of unlike colored wires
together, and connect an alligator clip to each pair.
(cont'd)