Acura 2002 RSX Service Manual page 1068

Emblem Replacement
NOTE: When removing the emblems, take care not to scratch the body.
1. To remove the front
"A" emblem, remove the front emblem base (see page 2O-97l..
2. Clean the body surface with a sponge dampened in alcohol, After cleaning, keep oil, grease and water from
getting on the surface.
3. Apply the emblem where shown. When installing the LEV emblem on the quarter glass, align the application tape
with the edge of the quarter glass, then press the emblem into place, and remove the application tape.
FRONT "A" EMBLEM
Unit: mm lin.l
Adhesive type:3M 4213E,or oquivalent Thickn*3 0.8 mm {0.03 in.}
RSX EMBLEM
ACURA EMBLEM
o f t h e h a t c h .
ADHESIVE TAPE
7012.761
REAR "A" EMBLEM
a:i
FRONT "A" EMBLEM
REAR "A" EMBLEM
_E!ee slrle !c!s!-
4. After installing the {ront
"A"
emblem, reinstall the front emblem base (see page 20-97).
20-101