Acura 2002 RSX Service Manual page 1245

lgnition Key Switch Test
NOTEi For more key-in beeper information, refer to the
circuit diagram (see page 22-92) and input test (see
page 22-94).
W h e n t h e i g n i t i o n k e y i s i n t h e i g n i t i o n , t h e k e y - i n
beeper circuit of the multiplex control unit senses
ground through the closed ignition key switch. When
you open the driver's door, the beeper circuit senses
ground through the closed door switch. When both
switches are closed (driver's door and ignition). the key-
in beeper in the gauge assembly is activated.
'1. Remove the steering column upper and lower
covers (see page 17-25).
2. Disconnect the 6P connector,
Check for continuity between the No. 1 and No, 2
t e r m t n a t s .
. There should be continuity with the key in the
ignition switch.
. There should be no continuity with the key
removed.
lf the continuity check is not as specified, replace
the steering lock assembly.
lgnition Key Light Test
1 . Remove the steering column upper and lower
covers (see page 17-25).
Disconnect the 6P connector.
The LED should come on when power is connecled
to the No. 6 terminal and ground is connected to
N o . 5 t e r m i n a l .
lf the LED does not come on, replace the steering
lock assembly.
22-93