Security Alarm System
Hood Switch Test
1 . Open the hood, and disconnect the 2P connector
(Alfrom the hood switch {B).
Check for continuity between the No. 1 and No. 2
terminals.
. There should be continuity when the hood is
opened (lever released).
. There should be no continuity when the hood is
closed (lever pushed down).
lf the continuity check is not as specified. replace
the switch.
22-190
Security Hatch Lock Knob Switch
Test
1. Open the hatch, and remove the hatch lowertrim
(see page 20-53).
2. Disconnectthe 3P connector (A)from the security
hatch lock knob switch (B).
Use the driver's door lock switch to unlock and lock
the hatch, then check for continuity between the
N o . 2 a n d N o . 3 t e r m i n a l s .
. There should be continuity when the hatch is
unlocked,
. There should be no continuity when the hatch is
locked.
lf the continuity check is not as specified, replace
the switch.