Acura 2002 RSX Service Manual page 1408

sRs
DTC Troubleshooting (cont'd)
DTC 4-3: Short to Another Wire or Decreased
Resistance in Front Passenqer's Seat Belt
Tensioner
Special Tools Required
. SRS inflator simutator 07SAZ-TB4O11A
. SRS simulator lead C 07TAZ-SZ501iA
. SRS simulator lead F 07XAZ-S230100
1. Erase the DTC memory (see page 23-23).
2. Turn the ignition switch ON fll), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Does the SRS indicator stay on?
YES Go to step 3.
NO Intermittent failure. system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-23).
3. Turn the ignition switch OFF. Disconnectthe
battery negative cable, and wait for 3 minutes.
4. Disconnect the front passenger's seat belt
tensioner 2P connector from the floor wire
harness (A).
az-s25011A
Connect the special tool (2 e connector) to the
floor wire harness 2P connector.
Reconnect the battery negative cable.
Erase the DTC memory.
6.
7 .
23-62
8. Read the DTC.
ls DTC 4-3 indicated?
YES - Go to step 9.
NO - Short in the front passenger's seat belt
tensioner; replace the front passenger's seat belt
( s e e p a g e 2 3 - 4 ) . I
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
'10.
Disconnect the floor wire harness 4p connector (A)
from the dashboard wire harness.
fr)
_-,_,-,_uJ
07xAz-s230100
1 1 .
07sAz-T84011A
Connect the special tool (2 e connectors) to the
dashboard wire harness 4P connector.
Reconnect the battery negative cable.
Erase the DTC memory,
Read the DTC.
ls DTC 4-3 indicated?
YES Go to step 15.
NO Short in the floor wire harness; replace lhe
f l o o r w i r e h a r n e s s . I
Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
1 2 .
1 4 .