Acura 2002 RSX Service Manual page 1451

5. Disconnect the floor wire harness 2P connector (A)
from the front passenger's side impact sensor (B).
Disconnect SRS unit connector A (18P) from
SRS unit.
I n e
)
)
23-105
8 .
7. Check resistance between the No.9 terminal of
SRS unit connector A (18P) and body ground. There
should be an ooen circuit, or at least 1 M Q .
SRS UNIT CONNECTOR A I18P)
Wire side ol lemale terminals
ls the resistance as specified?
YES Go to step 8.
NO Short to ground in the floor wire harness;
r e p l a c e t h e f l o o r w i r e h a r n e s s . l
Check resistance between the No.9 and No. 16
terminals of SRS unit connector A (18P). There
should be an open circuit, or at least 1 M Q .
SRS UNIT CONNECTOR A I18PI
Wire side of lemale terminals
ls the resistance as specitied?
YES Faulty front passenger's side impact sensor
or SRS unit; replace the front passenger's side
impact sensor (see page 23-139). lfthe problem is
still present, replace the SRS unit (see page 23-138).
I
NO - Short in the floor wire harness; replace the
floor wire harness.l