Acura 2002 RSX Service Manual page 1013

Hide thumbs Also See for 2002 RSX:

Table of Contents

Cable Assembly Replacement (cont'dl

Install the cable assembly in the reverse order of

removal, and note these itemi:

. Damaged parts should be replaced.

. Apply multipurpose grease to the groove

portions of the lifter {A) and slide stop link (B) and

to the sliding portions of the guide rail (C)

indicated bv the arrows.

. After reinstalling the cable assembly (D) on the

frame (E), fillthe groove in both grommets (F)

with sealant {G).

. Check the frame seal.

. When reinstalling the anchor rod (H). insert it into

the guide rail (l) by turning the stop (J) 90".

. Take care not to twist or lift the drain channel

. Before reinstalling the motor, make sur€ both

lifters are parallel, and in the tilt-up position (see

page 20-39).

. Before reinstalling the motor, installthe frame

and glass, then check the opening drag (see page

Grease applications:

Grease applications:

Soalant applications:

Anchor rod installation:

Chapters

Table of Contents