Table of Contents
Advertisement
sRs
1 0 .
DTC Troubleshooting (cont'd)
9 .
Read the DTC.
ls DTC 11-3 indicated?
YES- Go to step 9.
NO Short to another wire in the driver's side
airbag inflator; replace the driver's side airbag.l
Turn the ignition switch OFF. Disconnect the
battery negative cable. and wait for 3 minutes.
Disconnect the front passenger's side airbag 2P
connector (A) and both seat belt buckle tensioner
4P connectors (B).
Disconnect the special tool from the floor wire
harness 2P connector.
1 1 .
23-90
12. Disconnect SRS unit connector A ( 18P) from the
S R S u n i t .
13. Check resistance between the No.6 and No. 17
terminals of SRS unit connector A {18P). There
should be an open circuit, or at least 1 M Q.
SRS UNIT CONNECTOR A (T8PI
Wire side oI lemale terminals
ls the resistance as specified?
YES - Faulty SRS unit; replace the SRS unir (see
p a g e 2 3 - 1 3 8 ) . I
NO Short to another wire in the floor wire
harness; replace the floor wire harness.l
a
Advertisement
Chapters
Table of Contents
Troubleshooting
