Acura 2002 RSX Service Manual page 1381

)
11. Disconnect both seat belt tensioner 2P connectors
( A l I r o m t h e f l o o r w i r e h a r n e s s .
1 2 .
D i s c o n n e c t S R S u n i t c o n n e c t o r C ( 1 8 P ) f r o m t h e
S R S u n i t .
Disconnect the special tool from the cable reel 4P
connecror.
l . ,
23-35
14. Check resistance between the No.7 and the No. 16
t e r m i n a l s a n d b e t w e e n t h e N o . 6 a n d t h e N o . 1 5
terminals of SRS unit connector C { 18P). There
s h o u l d b e a n o p e n c i r c u i t , o r a t l e a s t 1 M Q .
SRS UNIT CONNECTOR C {18P}
Wire side of lemale terminals
ls the resistance as specified2
YES Faulty SRS unit; replace the SRS unit (see
p a g e 2 3 - 1 3 8 ) . 1
NO Go to step 15.
Disconnect the cable reel from the dashboard wire
harness. Check resistance between the No.7 and
t h e N o . 1 6 t e r m l n a l s a n d b e t w e e n t h e N o 6 a n d t h e
N o . 1 5 t e r m i n a l s o f S R S u n i t c o n n e c t o r C ( 1 8 P )
There should be an open clrcuit, or at least 1 M Q .
lsthe resistance as specified?
Y E S R e p l a c e t h e c a b l e r e e l . I
NO Replace the dashboard wire harness.l
1 5 .