7. Remove the screws (A) from both console side trim
(B), and remove the clips (C) from inside of the
console. Then detach the fronl clips (D) by pulling
the trim outward.
Fsstener Locations
A> : Scrow, 2 CD : CliP, 2 D> : CliP, 'r
d
""<;r I
tl1
8 . Remove the screws from rear end oflhe console'
Fait€ner Locations
) : Screw, 2
9. Remove the center console (A).
-1 Close the console lid.
-2 Lift up the rear of the console.
-3 Disconnectthe accessory power socket
connector (B) (for some models).
-4 Pullthe console backward to remove lt.
lnstall the console in the reverse order of removal,
and note these items:
. Replace any damaged cliPs.
. Make sure the accessory power socket connector
is plugged in proPerlY.
. Push the clip portions into place securely.
1 0 .
20-59