Acura 2002 RSX Service Manual page 1045

Seats
Front Seat Cover Replacement (cont'd)
9. Installthe cover in the reverse order of removal,
and note these items:
. To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hooks and clips.
. Make sure the side airbag harness and OPDS
harness (passenger's seat) are routed properly.
. Replace any clips you removed with new ones.
lnstall them with commerciallv available
upholstery ring pliers.
. lf necessary, reinitialize the OPOS control unit
(see page 23-24).
. Always use the proper replacement cover; never
install an aftermarket cover.
20-78
Seat Cushion Cover
1 . Remove the front sest (see page 20-72).
2. Remove these items from the front seat:
. Recline cover, driver's seat (see page 20-74)
passenger's seat (see page 20-75)
. Front seat belt buckle (see step 4 on page 23-5)
3. From under the seat cushion, detach the side
airbag connector clip, and on the passenger's seat,
detach the OPDS unit connector cliD. Release the
seat cushion cover from the seat cushion frame
spring, then pull the cover back, and remove the
harness bands,
Release the hook, and unziD the seat-back cover.
Pull the side airbag harness and the OPDS harness
(passenger's seat) out through the holes in the seat
cushion cover,
Remove the clip, and release the hooks (A).
Inside:
Foltono. Locltion
) : C[p, I
tu
T