Acura 2002 RSX Service Manual page 1469

31. Connect the No. 3 terminal o{ SRS unit connector C
(l8P) and rhe No. 5 terminal of the SRS unit
connector B {8P) with a jumper wire.
32.
5 J -
JUMPER
W|aE
PNK
Wire side of iemale terminals
Turn the ignition switch ON (ll).
Check the SRS indicator.
Does the SRS indicator go oft?
YES Faulty SRS unit; replace the SRS unit (see
page 23-138).1
NO Go to step 34.
Turn the ignition switch OFF.
Disconnect the jumper wire between the No. 3
terminal of SRS unit 18P connector C l18P) and the
No. 5 terminal ol the floor wire harness 8P
conneclor.
Check rhe No. 13 (104) fuse in the under-dash
fuse/relay box.
ls the tuse OK?
YES Go to step 40.
NO Go to step 37.
Replace the No. 13 (l0A) tuse in the under-dash
fuse/relay box.
Wire side of temalelerminals
SRSU N CONNECTOB C I18P}
7
34.
36.
3 7 .
sRs ut{rT cot{NEcToR B t8Pl
39.
38. Remove the gauge assembly (see page 22-66) then
disconnect connector A (22P) lrom the gauge
assemorv.
Check resistance between the No. 5 terminal of
SRS unit connector B (8P) and body ground. There
should be an open circuit, or at least 1 M O.
SBS UNIT CON'TIECTOR a l8Pl
Wire side of lemale terminals
ls the resistance as specified?
YES Faulty SRS indicator circuit in the gauge
assembly; replace the gauge assembly.ll
NO Short to ground in the floor wire harness or in
the dashboard wire harness; replace the faulty
harness.l
(cont'd)
23-123