Acura 2002 RSX Service Manual page 703

L
l n s t a l l t h e t r a n s m i s s i o n r a n g e s w i t c h ( A ) g e n t l y o n
the control shaft (B)with holding the N position
w i t h r h e 2 . 0 m m ( 0 . 0 8 i n . ) b l a d e { C ) .
Tighten the bolts on the transmission range switch
while you continue to hold the B position. Do not
move the transmission range switch when
tighlening the bolts. Remove the feeler gauge.
12 N.m 11.2 kgf.m,8.7 lbf.ftl
6 x 1 . 0 m m
ir'J
...r.a
! F
10. Connectthe connector securely, then installthe
transmission range switch cover (A).
6 x 1 . 0 m m
12 N.m
(1.2 kgf.m,8.7lbf.ftl
1 1. Turn the ignition switch ON (ll). Move the shift lever
through all gear positions, and check the
transmission range switch synchronization with the
Au/T gear position indicator'
12. Check that the engine can start in E and E
positions, and cannot start in any other shift lever
position.
13. Check that the back-up lights come on when the
shift lever is in El position.
14. Allow the wheels to rotate freely, then start the
engine, and check the shift lever operation.
14-171