Acura 2002 RSX Service Manual page 1040

5. Lift up the front seat, then detach the harness clips
(A). and disconnect the seat belt switch connector
{B), seat belt buckle tensioner connector {C), and
side airbag connector (D), and on the passenger's
seat, disconnect the OPDS unit connector (E). lf
equipped, disconnect the seat heater connector (F).
lf equipped with BOSE sound system. disconnect
the sub-harness connector (G), seat belt buckle
tensioner connector {C). side airbag connector (D),
front stereo amplifier connector (H). and rear stereo
amplifier relay (l). The passenger's seat is shown,
the driver's seat is similar exceDt it has no OPDS
unit connector.
Passenger's seat:
Passenger's seat with BOSE sound system:
'1.
With the help of an assistant, carefully remove the
front seat through the door opening.
Installthe seat in the reverse order of removal, and
note these items:
. Make sure each connector is plugged in properly.
. Apply liquid thread lock to the seat mounting
bolts before reinstal lation.
. Reconnect the negative cable to the battery.
. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
. Reset the clock.
. D o t h e E C M i d l e l e a r n p r o c e d u r e ( s e e p a g e 1 1 -
1 4 9 ) .
20-73