Acura 2002 RSX Service Manual page 1482

sRs
Cable Reel Replacement (cont'd)
Disconnect the dashboard wire harness 4P
connector (A) from the cable reel 4P connector (B),
then disconnect the dashboard wire harness 5p
connector {C) from the cable reel (D).
Release the tab (A), then remove the cable reel
from the column.
23-136
lnstallation
'1.
Before installing the steering wheel, align the front
wheels straight ahead.
2. Disconnectthe battery negative cable, and wait at
least 3 minutes.
3. Set the cancel sleeve (A) so that the projections {B )
are aligned vertically.
Carefully install the cable reel (A) on the sleering
column shaft. Then connect the 5P connector (Bl to
the cable reel, and connect the 4P connector (C) to
the dashboard wire harness (D).
4.
i"oF
\
-l
'...,