Acura 2002 RSX Service Manual page 1383

1 3 .
12. Disconnect SRS unit connector C (18P)from the
S R S u n i t .
Disconnect the special tool from the cable reel 4P
connector.
Reconnect the battery negative cable.
Turn the ignition switch oN (ll).
Check tor voltage between the No. 7 terminal of
SRS unit connector C (l8P) and body ground,
between the No. 16 terminal and body ground,
between the No. 6 terminal and body ground. and
between the No. 15 terminal and body ground.
There should be 0.5 V or less.
SRS UNIT CONNECTOR C (18P)
Wire side ol female terminals
ls the voltage as specified?
YES Fauhy SRS unit; replace the SRS unit (see
p a g e 2 3 - 1 3 8 ) . 1
NO Go to step 17.
1 4 .
1 5 .
1 6 .
I l . -
1 7 .
1 8 .
1 9 .
20.
Turn the ignition switch OFF.
Disconnect the cable reel from the dashboard wire
narness.
Turn the ignition switch ON (ll).
Check for voltage between the No. 7 terminal of
SRS unit connector C {18P) and body ground,
between the No. 16 terminal and body ground,
between the No. 6 terminal and body ground, and
between the No.
'15
terminal and body ground.
There should be 0.5 V or less.
ls the voltage as specilied?
YES Replace the cable reel.l
NO-Replace the dashboard wire harness.l
23-37