Acura 2002 RSX Service Manual page 1353

Hide thumbs Also See for 2002 RSX:

Table of Contents

4 . Remove the quarter piller trim as necessary (see

p a g e 2 0 - 5 1 ) .

Remove the retractor mounting bolt (A) and the

retractor bolt (B), then remove the rear seat belt (C)

and retractor (D).

6. lnstallthe belt in lhe reverse order of removal. and

note these items:

. Apply liquid thread lock to the anchor bolts

bef ore reinstallation.

. Check that the retraclor locking mechanism

functions as described (see page 23-8).

. Assemble the washers, collars, and bushing on

the upper anchor bolt as shown.

. Before installing the anchor bolt, make sure there

are no twists or kinks in the rear seat belt.

Upper anchor bolt construction:

TOOTHEO LOCK WASHER

Seat Belt Buckles

1. Remove the rear seat cushion (see page 20-82).

2. Remove the center anchor bolts {A), and remove

the seat belt buckles (B).

32 N.m {3.3 kgf.m,24lbf.ftl

:t- --'-,-;:1i]l

3. Install the buckles in the reverse order of removal,

and apply liquid thread lock to the anchor bolts

before reinstallation.

Chapters

Table of Contents