Acura 2002 RSX Service Manual page 1453

)
1 4 .
t 5 ,
1 6 .
1 7 .
13. Disconnect the OPDS unit harness 8P connector {A)
from the OPDS unit (Bi.
Turn the ignition switch ON (ll) for 30 seconds, then
turn it off.
Check the No. 9 (10A) fuse in the under-dash
fuse/relay box.
ls the tuse OK?
YES - Shon to ground in the OPDS unit; replace the
O P D S u n i t ( s e e p a g e 2 3 - 1 4 0 ) . 1
NO Short to ground in the No. 9 (10A) circuit.t
Turn the ignition switch OFF.
Check resistance between the No. 8 terminal of the
OPDS unit harness 8P connector and body ground.
T h e r e s h o u l d b e 0 1 . 0 Q .
OPDS UNIT HARNESS 8P CONNECTOF
Wire side oI female terminals
ls the resistance as specified?
YES Go to step 18.
NO Open in floor wire harness or OPDS unit
h a r n e s s , o r p o o r g r o u n d ( G 5 0 1 ) . l f t h e G 5 0 1 i s O K ,
replace the faulty harness.I
)
1 8 .
1 9 .
Turn the ignition switch OFF. Disconn6ct the
battery negative cable, and wait for 3 minutes.
Disconnect both side airbag connectors (A) and
both seat belt buckle tensioner 4P connectors (B).
(cont'dl
23-107