Table of Contents
Advertisement
sRs
DTC Troubleshooting (cont'd)
o .
7 .
8 .
R€connect the battery negative cable.
Erase the DTC memory.
Read the DTC.
ls DTC 12-3 indicatad?
YES Go to step g
NO - Short to another wire in th€ front passenger,s
side airbag inflator; replace the front passenger,s
side airbag. t
Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
Disconnect the driver,s side airbag 2P connector {A}
and both seat belt buckl€ tensioner 4p connectors
(B).
Disconnect the special tool from the floor wire
harness 2P connector.
9 .
1 0 .
.
23-96
1 3 .
12. Disconnect SRS unit connector A (18p)from the
SRS unit.
Check resistance between the No.7 and No. 18
terminals of SRS unit connector A (18p). There
should be an open circuit, or at least 1 M e.
SRS UNIT CONNECTOR A (18PI
Wire side ot temale terminals
ls the resistance as specitied?
YES- Faulty SRS unit; replace the SBS unit (see
p a g e 2 3 - 1 3 8 ) . t
NO Short to another wire in the tloor wire
harness; replace the floor wire harness.l
a
I
Advertisement
Chapters
Table of Contents
Troubleshooting
