Power Mirrors
Power Mirror Actuator Replacement
1. Remove the mirror holder, and disconnectthe
m i r r o r d e f o g g e r c o n n e c t o r s ( s e e p a g e 2 0 . 1 7 1 .
";
With defogger
2. Remove the power mirror {see page 20-16).
3. Disconnect the 3P (USA) or 6P (Canada) connector
from the mirror, and record the terminal locations
and wire colors,
4. Cut the wire harness with cutter, and remove the
gasket (A).
5. Remove the screw from the harness cliD (A).
22-130
t
6. Remove the three screws, and separate the mirror
h o u s i n g ( A ) f r o m t h e b r a c k e t ( B )
7. Remove the three screws and the actuator (A).