Acura 2002 RSX Service Manual page 1238

Exterior Lights
Brake Pedal Position Switch Test
' 1 .
Remove the driver's dashboard lower cover (see
p a g e 2 0 - 6 1 ) .
Disconnect the 4P connector (A) from the brake
pedal position switch (B).
Check for continuity between the No. 1 and No. 2
Ierm I na ts.
. There should be continuity when the brake pedal
is pressed.
. There should be no continuity when the brake
n a . l A l i . r a l a . c a . l
Check for continuity between the No. 3 and No. 4
terminals {with cruise control).
. There should be no continuity when the brake
pedal is pressed.
. There should be continuity when the brake pedal
is released.
lf necessary, adjust or replace the switch, or adjust
the pedal height (see page 19-6).
22-86
Ip