Acura 2002 RSX Service Manual page 1057

Hood
Adjustment
Slightly loosen each hood hinge bolt.
Adjust the hood (A) alignment in this sequence.
' Adiust the hood right and left, as well as forward
and rearward, by using the elongated holes on the hood hinge
t E ' .
' Turn the hood edge cushions (C). as necessary, to make
the hood fit flush with the body at the front and side
eoges.
6 x 1 . 0 m m
9.8 N.m
{1.0 kgf.m,
7.2tbt.ftl
6 x 1 . 0 m m
9.8 N.m
11.0 kgf.m, 7.2lbf.ft)
Adiust the hood latch (D) to obtain the proper height at the forward edge, and move the hood latch right or left
until the striker (E) is centered in the hood latch.
Tighten each bolt securelv.
1 .
: < \
\A
\ -v-
20-90