Acura 2002 RSX Service Manual page 1379

) J
11. Disconnect both seat belt tensioner 2P connectors
{A) from the floor wire harness.
Disconnect SRS unit connector C {18P) from the
SRS unit. Do not disconnect the special tool from
the cable reel.
' t 2 .
l l ,
23-33
'13.
Check resistance between the No.7 and the No 16
terminals and between the No. 6 and the No. 15
t e r m i n a l s o f S R S u n i t c o n n e c t o r C ( 1 8 P ) . T h e r e
s h o u l d b e 2 . 0 3 . 0 ! )
SRS UNIT CONNECTOR C I18P)
Wire side of female terminals
ls the resistance as sPecilied?
YES- Faulty SRS unit or poor contact at SRS unit
connector C (18P) and the SRS unit, check the
connection between the connector and the SRS
unit. lf the connection is OK, replace the SRS unit
( s e e p a g e 2 3 - 1 3 8 ) . 1
NO Open or increased resistance in the
dashboard wire harness or the cable reel; replace
the cable reel. lf the problem is still present, replace
the dashboard wire harness.l