Acura 2002 RSX Service Manual page 1048

6. Pull away the bottom portion oJ the seat-back pad
(A) from the seat-back frame (8), and remove the
nuts securing the lumber support (C). Remove the
bushing (D) and pivot arm from the seat-back frame.
Fastener Locations
a : N u t , 3
{1.0 kgf.m,
7.2 rbf.ftt
7. Remove the lumber support (A) as shown.
8. lnstall the lumber suooort in the reverse order of
removal, and note these items:
. Replace the bushing if it's damaged.
. To preventwrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hook.
. Make sure the side airbag harness is routed
properly.
20-81