Acura 2002 RSX Service Manual page 1316

Keyless/Power Door Lock System
Door Lock Actuator Test
Driver's Door:
1. Remove the driver's door panel (seepage2O-4).
2. Disconnect the 2P connector (A) from the actuator
( B ) .
Check actuator operation by connecting power to
the No. 1 terminal and ground the No. 2 terminal
for a moment.
The actuator should move to LOCK
To prevent damage to the actuator, apply
battery voltage momentarily.
Check actuator operation by connecting power to
t h e N o . 2 t e r m i n a l a n d g r o u n d t h e N o . 1 t e r m i n a l
for a moment.
The actuator should move to UNLOCK.
5 ,
To prevent damage to the actuator, apply
battery voltage momentarily.
lf the actuator does not work as specified, replace it.
22-164
Passenger's Door:
1. Remove the passenger's door panel (see page 20-
4 ) .
2, Disconnectthe 2P connector (A)from the actualor
( B ) .
Check actuator operation by connecting power to
the No. 1 terminal and ground the No. 2 terminal
for a moment.
The actuator should move to LOCK
4 .
To prevent damage to the actuator, apply
battery voltage momentarily.
Check actuator operation by connecting power to
t h e N o . 2 t e r m i n a l a n d g r o u n d t h e N o . I t e r m i n a l
for a moment.
The actuator should move to UNLOCK.
To prevent damage to the actuator, apply
battery voltage momentarily.
lf the actuator does not work as specified. replace it.
c