Acura 2002 RSX Service Manual page 1257

Audio Unit Removal/lnstallation
With BOSE Sound System
NOTE:
. Put on gloves to protect your hands.
. Take care not to scratch the dashboard and related
parts.
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons.
2. Remove the dashboard center lower cover (see
page 20-63),
3. Remove the two mounting bolts, then remove the
c e n l e r p a n e l .
4. Disconnect the audio unit connector (A). antenna
lead (B) and hazard warning switch connector {C),
then remove the audio unit (D).
5. Remove the four mounting bolts and the audio unit
a s s e m b l y ( A ) f r o m t h e a u d i o b r a c k e t ( B ) .
A
6. Remove the hazard warning switch (C) from the
a u d i o u n i t a s s e m b l y .
7 . I n s t a l l t h e h a z a r d w a r n i n g s w i t c h t o t h e a u d i o u n i t ,
then install the audio unit in the reverse order of
removal, and note these items:
. Install the hazard warning switch in the audio
u n i t .
. M a k e s u r e l h e a u d i o u n i t a n d h a z a r d w a r n i n g
light switch connectors are plugged in properly,
and the antenna lead is connected properly.
. Enter the anti-theft code for the radio. then enter
the customer's radio station presets.
22-105