Acura 2002 RSX Service Manual page 1031

Dashboard
Center Panel Removal/lnstallation
NOTE:
. When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the
related parts, to prevent damage.
. Take care notto scratch the dashboard and related
pans.
1. Remove the dashboard center lower cover (see
page 20-63).
2. Make sure you have the anti-theft code for the radio.
then write down the frequencies for the preset
buttons.
3. Remove the center panel (A).
-1 Remove the bolts (B)from the dashboard
center lower cover opening.
Gently pull out along the bottom to release the
lower clips (C, D), then along both sides and
top to release the remaining clips (C).
Disconnect the hazard warning switch
connector {E), audio unit connector (F}, and
a n t e n n a l e a d ( G ) .
3 D > : C l i p , 3
4 . Installthe panel in the reverse order of removal,
and note these items:
. Make sure each connector is plugged in properly
and antenna lead is connected properly.
. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
. Push the clip ponions into place securely
. Reset the clock
. D o t h e E C M i d l e l e a r n p r o c e d u r e ( s e e p a g e 1 1 -
149).
B>:Boti,2 c>:clip,
{ibbbbbbbb s?z
-"T-
20-64
Passenger's Dashboard Lower
Cover Removal/lnstallation
NOTE: Take care not to scratch the dashboard and
related parts.
1. Remove the passenger's dashboard lower cover
( A ) .
-1 Remove the clips.
-2 Pull down the edge nearestthe glove box.
-3 Pullthe cover away to release it from the
holders.
Fastener Locations
) : C t i p , 3
Installthe cover in the reverse order of removal,
a n d r e p l a c e a n y d a m a g e d c l i p s .
€)
'€#d